Differences

This shows you the differences between two versions of the page.

--- beaglebone_black [2018/02/07 20:57] – [Boot sequence] admin
+++ beaglebone_black [2021/02/04 20:57] (current) – admin
@@ Line 1: / Line 1: @@
 ====== Beaglebone Black ======
-http://beagleboard.org/Products/BeagleBone%20Black
-http://www.crashcourse.ca/wiki/index.php/BeagleBone_Black
+^  ^  BBB  ^  Subra i.MX6  ^
+| | XAM3359AZCZ100 AM335x 1xCortex-A8 1GHz| MCIMX6S5DVM10AB  i.MX6 1xCortex-A9 1GHz |
+| L1 Cache | 32KB+32KB | 32KB+32KB |
+| L2 Cache | 256KB | 512KB |
+| other SOC RAM | 128KB | 144KB |
+| RAM | 512MB DDR3 | 512MB |
+| Flash | 4GB 8-bit eMMC | 512MiB NAND |
+| | 2x PRU 32-bit microcontrollers | [[http://www.phytec.com/wiki/index.php?title=Category:PhyFLEX-i.MX6#phyCORE-i.MX6_Errata|phyFLEX-i.MX6 SOM]] \\ [[http://www.phytec.com/wiki/index.php/PhyFLEX-i.MX6_Linux_BSP-PD13.2.2|phyFLEX-i.MX6 SOM 1362.2 BSP PD13.2.2]] \\ [[http://www.phytec.in/manuals/subra-imx6.pdf|phyBOARD-Subra-i.MX6]]|
+https://elinux.org/Beagleboard:BeagleBoneBlack_Debian
+http://beagleboard.org/Products/BeagleBone%20Black
 http://circuitco.com/support/index.php?title=BeagleBoneBlack
@@ Line 11: / Line 22: @@
 https://graycat.io/tutorials/beaglebone-io-using-python-mmap/
+http://www.jumpnowtek.com/beaglebone/BeagleBone-Systems-with-Buildroot.html
 ===== U-Boot =====
 http://www.twam.info/hardware/beaglebone-black/u-boot-on-beaglebone-black
@@ Line 41: / Line 53: @@
 http://www.righto.com/2016/08/pru-tips-understanding-beaglebones.html
+http://www.righto.com/2016/09/how-to-run-c-programs-on-beaglebones.html
+http://processors.wiki.ti.com/index.php/PRU-ICSS_Remoteproc_and_RPMsg
+https://credentiality2.blogspot.com/2015/09/beaglebone-pru-gpio-example.html
 ===== Some project ideas =====