beaglebone_black

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
beaglebone_black [2018/02/08 08:56] – [Beaglebone Black] adminbeaglebone_black [2021/02/04 20:57] (current) – admin
Line 1: Line 1:
 ====== Beaglebone Black ====== ====== Beaglebone Black ======
 +
 +
 +^  ^  BBB  ^  Subra i.MX6  ^
 +| | XAM3359AZCZ100 AM335x 1xCortex-A8 1GHz| MCIMX6S5DVM10AB  i.MX6 1xCortex-A9 1GHz |
 +| L1 Cache | 32KB+32KB | 32KB+32KB | 
 +| L2 Cache | 256KB | 512KB |
 +| other SOC RAM | 128KB | 144KB |
 +| RAM | 512MB DDR3 | 512MB |
 +| Flash | 4GB 8-bit eMMC | 512MiB NAND |
 +| | 2x PRU 32-bit microcontrollers | [[http://www.phytec.com/wiki/index.php?title=Category:PhyFLEX-i.MX6#phyCORE-i.MX6_Errata|phyFLEX-i.MX6 SOM]] \\ [[http://www.phytec.com/wiki/index.php/PhyFLEX-i.MX6_Linux_BSP-PD13.2.2|phyFLEX-i.MX6 SOM 1362.2 BSP PD13.2.2]] \\ [[http://www.phytec.in/manuals/subra-imx6.pdf|phyBOARD-Subra-i.MX6]]|
 +
  
 https://elinux.org/Beagleboard:BeagleBoneBlack_Debian https://elinux.org/Beagleboard:BeagleBoneBlack_Debian
Line 11: Line 22:
 https://graycat.io/tutorials/beaglebone-io-using-python-mmap/ https://graycat.io/tutorials/beaglebone-io-using-python-mmap/
  
 +http://www.jumpnowtek.com/beaglebone/BeagleBone-Systems-with-Buildroot.html
 ===== U-Boot ===== ===== U-Boot =====
 http://www.twam.info/hardware/beaglebone-black/u-boot-on-beaglebone-black http://www.twam.info/hardware/beaglebone-black/u-boot-on-beaglebone-black
Line 44: Line 56:
  
 http://processors.wiki.ti.com/index.php/PRU-ICSS_Remoteproc_and_RPMsg http://processors.wiki.ti.com/index.php/PRU-ICSS_Remoteproc_and_RPMsg
 +
 +https://credentiality2.blogspot.com/2015/09/beaglebone-pru-gpio-example.html
  
 ===== Some project ideas ===== ===== Some project ideas =====
  • beaglebone_black.1518080179.txt.gz
  • Last modified: 8 years ago
  • by admin